Learning the Process Turning Off Your Main Water Line During a Exploded Pipe

Visit My Site


Just about everyone will have their unique perception on the subject of Steps to Take When a Pipe Bursts.

What Do I Do If I Have A Burst Pipe In My Home?
You have to know just how to shut off your main water line if you suffer from a ruptured pipe. Do not wait on a plumbing emergency prior to discovering exactly how to get this done. Besides, other than emergency leakages, you will require to shut off your primary water valve for plumbing fixings or if you leave for a long journey. Discover even more about it in this miniature guide.


Why Must You Close the Main Line Off?

Acquainting yourself with just how your mainline turns on and off can conserve you during an emergency. For instance, when a pipeline suddenly bursts in your home, you'll be besieged with panic. Therefore, you can conveniently close the shutoff off and also prevent even more damage if you know what to do. Additionally, closing this off guarantees you don't have to handle an abrupt flooding in your home.
On top of that, closing as well as opening up the shutoffs from time to time ensures they don't get stuck. It is additionally the very best time for you to examine for rust or various other damaged connections. Moreover, make it a point to educate other member of the family on what to do. This makes regular upkeep and also handling emergency situations so much less complicated. You can potentially save on your own countless dollars out of commission.


Where is This Key Valve Found?

The major water line supply can vary, so you might require to find time to identify where it is. Unfortunately, when your home is obtaining soaked because of a burst pipeline, you do not have the luxury of time during an emergency. Thus, you need to plan for this plumbing predicament by learning where the valve is located.
This shutoff valve might appear like a sphere valve (with a lever-type take care of) or a gate shutoff (with a circle faucet). Positioning relies on the age of your residence and also the climate in your area. Check the complying with common spots:


  • Inside of House: In colder environments, the city supply pipelines run into your house. Examine typical utility locations like your basement, utility room, or garage. A likely area is near the hot water heater. In the basement, this shutoff will go to your eye level. On the various other primary floorings, you may require to bend down to discover it.

  • Outdoors on the Outside Wall: The main valve is outside the home in tropical climates where they do not experience winter months. It is commonly connected to an exterior wall surface. Look for it near an exterior faucet.

  • Outdoors by the Street: If you can not locate the valve anywhere else, it is time to inspect your road. Maybe outdoors next to your water meter. It could be below the gain access to panel near the ground on your road. You might require a meter trick that's marketed in equipment shops to remove the panel cover. You can locate 2 shutoffs, one for city use and one for your residence. Ensure you shut off the right one. And also you will certainly recognize that you did when none of the faucets in your house release freshwater.


Must This Always Be Shut down?

Aside from emergency situations, fixings, or long trips, you may not need to switch off the primary valve. As an example, if only one component has issues, you can turn off the branch shutoff because spot. This way, you can still make use of water in other parts of your house. For finest outcomes, call a trusted plumber for emergencies.


Water Pipe Burst: 6 Steps You Need to Take Now


Why Did My Water Pipe Burst?


There are many reasons why a water pipe fails. While each situation is different, there are a few common causes of water pipe bursts, from weather to external damage.

Let’s look at five culprits, and the steps to take to prevent issues.


Freezing Temperatures


If you live in a climate where temperatures drop below freezing, be aware of the heightened potential for pipe problems.

When temperatures drop, the water inside your pipes may turn to ice. As more water trickles in, the frozen area grows… and the frozen water expands.

Over time, the pressure may be too much. Bonds in the pipe weaken and cracks form. When the ice finally melts, the temperature change can shatter both the ice and the surrounding pipe. If the pressure is strong enough, the pipe bursts.


To keep pipes from freezing and bursting, shut off the water to outdoor spigots and drain the remaining water from pipes. Insulate indoor pipes to keep them warm.

If pipes are on an outer wall, open cabinets if possible. When it’s freezing outside, leave at least one faucet slowly dripping to keep the water moving inside the pipes at all times.

If the temperature gets well below freezing and even into the negatives, you may want to leave a steady stream of water flowing. A water bill that’s a little bit higher will likely be much cheaper than flooding repairs.


Rust and Corrosion


Corrosion is another common cause of burst pipes. Rust and corrosion build up inside pipes, especially in older homes and in areas where water has a high iron content.

Over time, the corrosion weakens pipes, leading to an increased chance of a burst. Steel pipes are especially susceptible to rust.

To prevent rust and corrosion, replace steel pipes with plastic or copper. These types of pipes tend to resist corrosion longer.


Tree Roots


When trees around your home grow taller, their roots grow downward and outward, too. Sometimes, roots come in contact with water pipes.

In a battle between tree roots and pipes, the roots usually win. As roots continue to grow and press against the pipes, the pipes crack, leading to leaks.

To keep roots from encroaching, be sure to plant trees far from your water pipes. Choose slow-growing tree varieties that have small root balls.

If trees are already encroaching, you may try to add a physical or chemical barrier to prevent roots from accessing pipes.


Movement and Water Pressure


Sometimes, the soil around pipes shifts or moves, causing pipes to lose stability and crack. Movement may occur due to nearby construction, temperature fluctuations, or repairs made to other parts of the plumbing system.

High water pressure may also cause pipes to move. If the pressure reaches a PSI above 60, pipes may simply burst from the strain.

Construction is a major cause of pipe movement. Request that dirt from nearby construction isn’t dumped on top of your pipe system to prevent movement and increase pressure.




You already know that clogs can back up your sink and shower drains. But did you know that they can lead to burst pipes, too? A clog can cause water pressure to build up behind it, especially if it’s deep within the system.

That’s why it’s important to be mindful of what gets poured down the drain, goes into the garbage disposal, and flushed down the toilet. Limiting drains to water and approved materials can help prevent deep clogs.


Signs of a Busted Water Pipe


How do you know if you have a burst water pipe? The most obvious sign is finding puddles of water in your home.

However, puddles can come from leaks, rather than bursts. Here’s how to tell the difference.

If a puddle gets bigger when you turn the water on, that indicates a burst pipe. Because bursts allow water to move through the walls, you may notice water puddling directly under the burst pipe, and also pooling in other places.

For instance, if the pipe leading to the bathroom sink bursts, you may see puddles under the sink and on the floor near the tub and toilet. In contrast, leaks tend to pool in just one place.

Another sign of a burst pipe? Water pressure issues. Burst pipes generally lead to low water pressure, as the cracked area affects how much water moves through the pipes.

Stains may appear on the walls and floors near a busted water pipe. If bursts are caused by rust, you may notice that water has a strange, metallic odor and reddish discoloration. The presence of mold or mildew may also indicate a burst water pipe.


First Steps to Take When a Water Pipe Bursts

  • Locate your main water valve and shut it down to prevent any more water from flowing into your walls and home. Your main shut-off may be in your basement, crawl space, or by your hot water heater. (If you think water has come in contact with electrical sockets, wiring, or a fuse box, turn your electricity off, too).

  • Drain your faucets. Starting with the cold tap, drain the remaining water out of the pipes, then flush every toilet in the house a few times. Next, turn off your boiler or water heater and drain the hot tap. This will relieve water pressure.

  • Call the plumber once the water is turned off and pressure is relieved. Getting professional help quickly is key.

  • Try to find the burst pipe. If you can find the leak, place a bucket under it to catch the water. Look for bulges in the ceiling or other signs of water damage.

  • Document the damage. You may need to make an insurance claim, so document thoroughly. Take close-up photos of damaged items and areas, and of the pipes themselves. Use rulers in pictures to show water levels. Take photos from different angles; the more documentation you have, the better. You may even want to take a video of the leak before you shut off the water main.

  • Clean up the mess. If water sits too long, microbes will grow, leading to harmful mold and mildew. This can lead to long-term damage, so get your home dry as soon as possible. You may need to call in a professional drying company, as simply opening the windows and turning on fans may not be enough.



Got a Burst Pipe? Turn Off Your Main Water Valve


I found that article about Steps to Take When a Pipe Bursts when doing a search on the internet. Are you aware of someone else who is fascinated with the niche? Be sure promote it. Thanks for your time spent reading it.

24/7 emergency? We're here!

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Learning the Process Turning Off Your Main Water Line During a Exploded Pipe”

Leave a Reply